Nice.
I hadn’t noticed the low set painter holes. For lining?
I expect the skid plates are straight and true this time. I just laid a 2-ply skid plate. It’s a beauty, underlayer of thick bias weave tape covered with a larger piece of Dynel. 50/50 epoxy resin and G/flex, graphite powder, black pigment, peel ply compressed using a hard roller.
One of the best skid plates I have installed yet. Except. . . . . . I forgot to draw a centerline up the Dynel for aiming purposes along the keel line. One skid plate is ¼” off kilter at the wide end. Barely noticeable, but I see it.
Centerline drawn right up the middle of the skid plate fabric really helps.