Search results

On calm seas and light winds I find the second cup of coffee in the canoe a nice start to the paddling day. I crafted a holder for the coffee mug I use. An oak base with glued on gripper pad keeps it in place on the hull floor. Later in the day when the coffe mug is stowed away it becomes a...

Along with the Aeropress sometimes I also will use the GSI collapsible silicone cone filter and #4 paper filters. I think the Aeropress makes a better brew, but like the paper cone filter approach because it allows me to brew 2 mugs of coffee at the same time. When using a #4 cone filter, I...

Agree on the Aeropress. Involves a bit more work than a drip method but makes a superb brew of your coffee

What a great blend of music and graphic arts!

I use an Astral Sea Wolf. Very nice, large clam shell pocket in the front. Quite comfortable, with a fleece lined hand warmer pocket behind the clam shell. The Sea Wolf no longer in Astral lineup, but it appears Astrals Ninja PFD is similar.

That is a stunning photo! Thanks for sharing.

I bought a new 16 Royalex Penobscot with aluminum gunnels which OT specs @59 lbs. I'm a larger guy at 235 and it was a fine tandem with my wife @ 135, but found I didn't like the performance with a 200 lb bow partner, seemed too small a canoe. I converted it to a solo and like it better as a...

How about Sweet Carambola? That is the B17 variety of star fruit.

Yale Blue catches my eye as well

I have never used tyvek inside the tent, so I can’t answer your question. My use as a foot print was to have it take the abuse from ground contact rather than the tent floor.

Tyvek is made in a light weight version that is used by kite makers. Type 1443R Tyvek. I've used it to make tent foot prints and vestibule ground covers...

Same blackwater creek I paddled yesterday and while there is fog around, it is not hanging low, dense, and mystical like New Years Day. I’m on a roll - I’ve now paddled every day this year.

Morning paddle on New Years Day. Black water creek in NC

Yes, I considered that when I swapped out the aluminum thwart with the wood laminate. I could get a better finger grip on the thwart that way, but would give up looking at the colors on the beveled laminate face. I opted for the canoe looking pretty.

This thread motivated me to make the effort to move the cam cleat. I took some left over thwart scraps, made a block and mounted it.. I’ll need to try it on the water, but it looks like it should work.

You could also consider making a partial front cover, which would cover just the area that collects drips from the paddle. This polygon would approximate a rectangle as it will be near the forward center of the canoe. You could test this concept with some 4 mil plastic and duct tape

The line in the photo is 5/16”. The carbon cam cleat is a Harken model 365 which can accept line from 1/8” to 3/8”. Stronger cam cleats that accept larger line are also available from Harken. https://www.westmarine.com/harken-standard-365-carbo-cam-cleat-367211.html

Cooke gave me excellent directions for installing the nylon cover and drilling the holes. They even sold me a hand rivet gun modified for their snap closures.

Since you're on an outfitting roll here is an idea to consider. Use a Harken cam cleat to restrain the painter closer to you, within reach of your sitting/kneeling position. This allows stepping out of the canoe while the hull is afloat and walking the canoe to the landing. The idea came to...

Growing the sport, one paddler at a time