Gamma1214's latest activity

Didn't watch far, but at least some of that is from Nanook of the North, which all us anthropology majors had to watch in college back...

Stripping Part 1 Since this is a staple less build, some of the clamping solutions need to get creative. Whenever there is a concave...

That's true of any & all taxes. I am also in the "tariffs won't affect my paddling plans much" group except that I may have to include...

I stopped over briefly tonight, primarily to fix the jack stand set-up. No, when I tilted it without lifting the base off of the...

Dafaq?!

As part of my plans, I'll need to be able to tilt this hull (before glassing the exterior) 90 degrees or so (side-to-side) and I lack...

Sorry For mixing this in with Gamma 1214's Thread ! But looking at the form spacing, and comparing it to a friend's build. My friend...

Gamma, if you have a gap of 3/8" to build up, it may be less work just to remake/rework that form, you have a perfect alignment on the...

The NWC Merlin is a hard tracking boat. I gave away the one I made, but have paddled it on a number of occasions in flat and moving...

StrongBack Setup This isn't a new strongback and gets used for a lot of different things in the shop. So the first step for me is to...

My memory of that stretch of river is characterized by lots of bumping and scraping, but its no highwire act. You might struggle to...

Congratulations to Glenn, Alan and all the previous folks who have kept this operation going. It's the one forum I check every day I'm...

After two years of membership here in the forum, I can only report really good things. There is such a wide range of information that it...

Yes, the curvature between the stem form & station #14 is due to the clamp I used (I needed one hand for the camera and have only 2)...